Innovations for cassette filter Infa-Micron MKR

The cassette filter INFA-MICRON MKR is especially suitable for dedusting of challenging processes in the chemical and pharmaceutical industry where APIs (Active Pharmaceutical Ingredients) as dusts or powders occur. Lowest residual dust contents down to 0.001 mg/m³ and reliable protection of operating staff are demanded for these applications. The previous design of the MKR already fulfills the demands of operational safety and protection from contamination. Just in time for the Powtech the filter was launched with manifold innovations which bring special values for the pharmaceutical industry.

Also regarding constructive explosion protection the new MKR sets standards: It is suitabable for considerable higher K-values and usable for hybrid mixtures.

Additional benefits of the new MKR cassette filter are:

• improved ease of operation
• increased gas tightness
• easier cleanability inside and outside
• less height

Infa-Lamellen-Jet AJL with new design

The Infa-Lamellen-Jet AJL is a versatilely usable aspiration filter for separation of dry, little sticky dusts. Filter units of this series achieve a maximum filter area on minimum space requirements because of their pleated filter elements (filter lamellas). Now the design of the AJL has been refreshed. Numerous demands on operating efficiency and flexibility for the operator have been considered.

The former vertical stiffenings inside the raw gas chamber are now on the exterior side thus the filter is easier to clean. The hinges of the door can be changed from left to right at any time. A change of the installation situation is therefore practicable without much effort. The justification of inspection doors is simplified, the supporting construction strengthened. A pressure shock resistant design is in development.

Additional benefits of the new AJL pleated element filter are:

• easier cleanability inside
• flexible adaptions upon requirements
• retrofit into a pocket filter

New design of cartridge filter Infa-Jetron AJP and now available with secondary filter stage

The popular Infa-Jetron AJP series, designed as dust collectors or vent filters, has received enhancement. As of now the dust collector is available with a secondary filter stage, too. The second filter stage with filter cassette reduces the residual dust content and serves as safety filter at the same time. Further features of the filter unit are additional lengths of filter cartridges of 500 mm and 1,400 mm. The filter surface and the volume flow are consequently extended.

Different possibilities for raw gas inlet and clean gas outlet also provide a large flexibility as well as the different basicmaterials for the raw gas and clean gas area.

Additional benefits of the new AJP dust collector are:

• easier assembly
• extended volume flow ranges
• more filter surface at less floor space
• higher safety and less residual dust content because of secondary filter stage